F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

107
Default
No password is set for switching to a higher privilege level.
Views
System view
Default command level
2: System level
Parameters
level user-level: User privilege level, which ranges from 1 to 3 and defaults to 3.
cipher: Sets a ciphertext password.
simple: Sets a plaintext password.
password: Specifies the password string. This argument is case sensitive. If simple is specified, it must be
a string of 1 to 16 characters. If cipher is specified, it must be a ciphertext string of 1 to 53 characters.
Under FIPS, a password must be a combination of uppercase letters, lowercase letters, digits, and special
characters, and must be at least eight characters long.
Usage guidelines
For secrecy, all keys, including keys configured in plain text, are saved in cipher text.
Examples
# Set the password for switching to privilege level 3 to plaintext abc.
<Sysname> system-view
[Sysname] super password level 3 simple abc
system-view
Use system-view to enter system view from user view.
Syntax
system-view
Views
User view
Default command level
2: System level
Examples
# Enter system view from user view.
<Sysname> system-view
System View: return to User View with Ctrl+Z.
[Sysname]
Related commands
• quit
• return