F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

9
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
This command is not supported in FIPS mode.
Examples
# Display the configuration of the device when it serves as a Telnet client.
<Sysname> display telnet client configuration
The source IP address is 1.1.1.1.
The output shows that the device uses the source IPv4 address 1.1.1.1 for outgoing Telnet packets when it
serves as a Telnet client.
display user-interface
Use display user-interface to display user interface information.
Syntax
display user-interface [ num1 | { aux | console | vty } num2 ] [ summary ] [ | { begin | exclude |
include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
num1: Specifies the absolute number of a user interface. The value typically starts from 0.
aux: Specifies an AUX user interface.
The following matrix shows the keyword aux and firewalls and UTM compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A No
U200-S No
console: Specifies the console user interface.