F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

12
Examples
# Display information about the user interfaces being used.
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
0 CON 0 00:02:47 3
+ 49 VTY 0 00:00:00 TEL 3
Following are more details.
VTY 0 :
Location: 192.168.0.214
+ : Current operation user.
F : Current operation user work in async mode.
The output shows that two users have logged in to the device: you are using user interface VTY 0, and
the other user is using the console user interface. Your IP address is 192.168.0.214 and user privilege
level is 3.
Table 5 Command output
Field Descri
p
tion
Idx Absolute number of the user interface.
UI
Relative number of the user interface. For example, with VTY, the first column
represents user interface type, and the second column represents the relative number of
the user interface.
Delay Time elapsed after the user's last input, in the format hh:mm:ss.
Type User type, such as Telnet and SSH.
Userlevel User level: 0 for visit, 1 for monitor, 2 for system, and 3 for manage.
+ Indicates the current user, the user who executed the display command.
Location IP address of the user.
F The current user is operating in asynchronous mode.
display web users
Use display web users to display information about the Web users.
Syntax
display web users [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.