F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

15
Parameters
num1: Specifies the absolute number of a user interface. The value typically starts from 0.
aux: Specifies an AUX user interface.
The following matrix shows the keyword aux and firewalls and UTM compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A No
U200-S No
console: Specifies the console user interface.
vty: Specifies a VTY user interface.
num2: Specifies the relative number of a user interface.
Usage guidelines
This command cannot release the connection you are using.
Examples
# Release user interface VTY 1:
1. Display which users are operating the device.
<Sysname> display users
The user application information of the user interface(s):
Idx UI Delay Type Userlevel
+ 49 VTY 0 00:00:00 TEL 3
50 VTY 1 00:00:03 TEL 3
Following are more details.
VTY 0 :
Location: 192.168.1.26
VTY 1 :
Location: 192.168.1.20
+ : Current operation user.
F : Current operation user work in async mode.
2. If the operations of the user on VTY 1 affect your operations, log out the user.
<Sysname> free user-interface vty 1
Are you sure to free user-interface vty1? [Y/N]:y
history-command max-size
Use history-command max-size to set the size of the command history buffer for a user interface.
Use undo history-command max-size to restore the default.