F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

53
10%|
5%| #
------------------------------------------------------------
10 20 30 40 50 60 (minutes)
cpu-usage last 60 minutes(T03M)
The output shows the historical CPU usage statistics of task 6 (with the task name T03M) in the last 60
minutes:
• 5%: 20 minutes ago
• 2% or lower than 2%: other time
display device
Use display device to display device information.
Syntax
display device [ cf-card | usb ] [ slot slot-number | verbose ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view
Default command level
2: System level
Parameters
cf-card: Displays CF card information.
usb: Displays USB device information. The current software version does not support USB. The USB
interfaces are reserved for future use.
slot slot-number: Specifies a card.
The following matrix shows the value range for the slot-number argument on different firewalls and UTM
devices:
Hardware Slot number
F1000-A-EI/F1000-S-EI 0, indicates the PCB.
F1000-E 0, indicates the PCB.
F5000 0 to 4, 0 for the MPU and 1 to 4 for an interface module.
Firewall module The slot slot-number option is not supported.
U200-A 0, indicates the PCB.
U200-S 0, indicates the PCB.
verbose: Displays detailed information.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.