F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

2
******************************************************************************
User interface con0 is available.
Please press ENTER.
3. Press Enter.
Pressing Enter does not start a session.
4. Enter s.
A terminal session is started.
<Sysname>
%Dec 11 14:04:02:002 2012 Sysname SHELL/5/SHELL_LOGIN: Console logged in from con0.
authentication-mode
Use authentication-mode to set the authentication mode for a user interface.
Use undo authentication-mode to restore the default.
Syntax
In non-FIPS mode:
authentication-mode { none | password | scheme }
undo authentication-mode
In FIPS mode:
authentication-mode scheme
undo authentication-mode
Default
The authentication mode is scheme for VTY user interfaces and none for the console user interface.
The following matrix shows the AUX user interface and firewalls and UTM compatibility:
Hardware Ke
y
word com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E Yes, the default authentication mode is password.
F5000 Yes, the default authentication mode is password.
Firewall module Yes, the default authentication mode is none.
U200-A No
U200-S No
In FIPS mode, the authentication mode must be scheme.
Views
User interface view