F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

68
display schedule reboot
Use display schedule reboot to display the reboot schedule.
Syntax
display schedule reboot [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the reboot schedule.
<Sysname> display schedule reboot
System will reboot at 16:00:00 03/10/2006 (in 2 hours and 5 minutes).
Related commands
• schedule reboot at
• schedule reboot delay
display system-failure
Use display system-failure to display the exception handling method.
Syntax
display system-failure [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
3: Manage level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see the chapter on CLI in Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.