F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display the exception handling method.

<Sysname> display system-failure

System failure handling method: reboot

Related commands

system-failure

display transceiver

Use display transceiver to display the key parameters of transceiver modules.

Syntax

display transceiver interface [ interface-type interface-number ] [ | { begin | exclude | include }

regular-expression ]

Views

Any view

Default command level

2: System level

Parameters

interface [ interface-type interface-number ]: Displays the key parameters of the transceiver module in an

interface. The interface-type interface-number argument specifies an interface by its type and number. If

no interface is specified, this command displays the key parameters of the transceiver modules in all

interfaces.

|: Filters command output by specifying a regular expression. For more information about regular

expressions, see the chapter on CLI in Getting Started Guide.

begin: Displays the first line that matches the specified regular expression and all lines that follow.

exclude: Displays all lines that do not match the specified regular expression.

include: Displays all lines that match the specified regular expression.

regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.

Examples

# Display the key parameters of the transceiver module in interface GigabitEthernet 0/1.

<Sysname> display transceiver interface gigabitethernet 0/1

GigabitEthernet0/1 transceiver information:

Transceiver Type : 1000_BASE_SX_SFP

Connector Type : LC

Wavelength(nm) : 850

Transfer Distance(m) : 550(50um),270(62.5um)

Digital Diagnostic Monitoring : YES

Vendor Name : HP

Ordering Name : JDXXX