F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

79
reboot
Use reboot to reboot the device or the specified subcard.
Syntax
reboot
Views
User view
Default command level
3: Manage level
Usage guidelines
CAUTION:
• Device reboot can interrupt network services.
• If the main system software image file has been corrupted or does not exist, the device cannot reboot.
You must re-specify a main system software image file, or power off the device and then power it on so
the system can reboot with the backup system software image file.
For data security, if you are performing file operations at the reboot time, the system does not reboot.
Examples
# Reboot the device.
<Sysname> reboot
The output is not shown.
reset unused porttag
Use reset unused porttag to clear unused 16-bit interface indexes.
Syntax
reset unused porttag
Views
User view
Default command level
1: Monitor level
Usage guidelines
A confirmation is required when you execute this command. The command will not run if you enter N to
cancel the operation or fail to make a confirmation within 30 seconds.
Examples
# Clear unused 16-bit interface indexes.
<Sysname> reset unused porttag
Current operation will delete all unused port tag(s). Continue? [Y/N]:y
<Sysname>