F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

85
Usage guidelines
A device name identifies a device in a network and works as the user view prompt at the CLI. For
example, if the device name is Sysname, the user view prompt is <Sysname>.
Examples
# Set the name of the device to Device.
<Sysname> system-view
[Sysname] sysname Device
[Device]
system-failure
Use system-failure to configure the exception handling method.
Use undo system-failure to restore the default.
Syntax
system-failure { maintain | reboot }
undo system-failure
Default
The system adopts the reboot method to handle exceptions.
Views
System view
Default command level
3: Manage level
Parameters
maintain: Specifies that when the system detects any software abnormality, it maintains the current
situation, and does not take any measure to recover itself.
reboot: Specifies that when the system detects any software abnormality, it recovers itself through
automatic reboot.
Examples
# Set the exception handling method to reboot.
<Sysname> system-view
[Sysname] system-failure reboot
temperature-limit (advanced)
Use temperature-limit to set advanced temperature alarm thresholds for a device or a card.
Use undo temperature-limit to restore the default.
Syntax
temperature-limit slot slot-number hotspot sensor-number lowerlimit warninglimit [ alarmlimit ]
undo temperature-limit slot slot-number hotspot sensor-number
Default
The temperature alarm thresholds depend on the hotspot sensors.