F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Getting Started Command Reference-6PW100

94
User management commands
acl (user interface view)
Use acl to reference ACLs to control access to the VTY user interface.
Use undo acl to cancel the ACL application.
Syntax
To use a basic or advanced ACL:
acl [ ipv6 ] acl-number { inbound | outbound }
undo acl [ ipv6 ] acl-number { inbound | outbound }
To use an Ethernet frame header ACL:
acl acl-number inbound
undo acl acl-number inbound
Default
Access to the VTY user interface is not restricted.
Views
VTY user interface view
Default command level
2: System level
Parameters
ipv6: When this keyword is present, the command supports IPv6; otherwise, it supports IPv4.
The following matrix shows the ipv6 keyword and firewalls and UTM compatibility:
Hardware i
p
v6
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
acl-number: Specifies the number of the ACL:
• Basic ACL—2000 to 2999.
• Advanced ACL—3000 to 3999.
• Ethernet frame header ACL—4000 to 4999.