F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

106
Field Descri
p
tion
Status
Listening service status:
• active—Listening service is ready.
• inactive—Listening service is not ready.
nqa server enable
Use nqa server enable to enable the NQA server.
Use undo nqa server enable to disable the NQA server.
Syntax
nqa server enable
undo nqa server enable
Default
The NQA server is disabled.
Views
System view
Default command level
2: System level
Examples
# Enable the NQA server.
<Sysname> system-view
[Sysname] nqa server enable
Related commands
• nqa server tcp-connect
• nqa server udp-echo
• display nqa server status
nqa server tcp-connect
Use nqa server tcp-connect to configure a listening service to enable the NQA server to listen and
respond on the specified IP address and port.
Use undo nqa server tcp-connect to remove the TCP listening service.
Syntax
nqa server tcp-connect ip-address port-number
undo nqa server tcp-connect ip-address port-number
Views
System view
Default command level
2: System level