F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

116
destination-port, source-port,
ip-protocol
# Display the configured link-aggregation load sharing criteria of the aggregation group corresponding
to Layer 2 aggregate interface Bridge-Aggregation 10.
<Sysname> display link-aggregation load-sharing mode interface bridge-aggregation 10
Bridge-Aggregation10 Load-Sharing Mode:
destination-ip address, source-ip address
Table 27 Command output
Field Descri
p
tion
Link-Aggregation
Load-Sharing Mode
Global link-aggregation load sharing criteria.
• By default, the link-aggregation load sharing criteria for Layer 2 traffic and
Layer 3 traffic are displayed.
• If you have configured the global link-aggregation load sharing criteria, the
configured ones are displayed.
Bridge-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group corresponding
to the aggregate interface Bridge-Aggregation 10.
• By default, the global link-aggregation load sharing criteria are displayed.
• If you have configured link-aggregation load sharing criteria especially for
this aggregation group, the configured ones are displayed.
Route-Aggregation10
Load-Sharing Mode
Link-aggregation load sharing criteria of the aggregation group corresponding
to aggregate interface Route-Aggregation 10.
• By default, the global link-aggregation load sharing criteria are displayed.
• If you have configured link-aggregation load sharing criteria especially for
this aggregation group, the configured ones are displayed.
Layer 2 traffic:
destination-ip address,
source-ip address
Default link-aggregation load sharing criteria for Layer 2 traffic. In this sample
output, the criteria are the source and destination IP addresses of packets.
Layer 3 traffic:
destination-ip address,
source-ip address
Default link-aggregation load sharing criteria for Layer 3 traffic. In this sample
output, the criteria are the source and destination IP addresses of packets.
destination-ip address,
source-ip address
User-configured link-aggregation load sharing criteria. In this sample output, the
criteria are the source and destination IP addresses of packets.
display link-aggregation member-port
Use display link-aggregation member-port to display detailed link aggregation information for the
specified member ports. If no port is specified, this command displays detailed link aggregation
information for all member ports.
Syntax
display link-aggregation member-port [ interface-list ] [ | { begin | exclude | include }
regular-expression ]
Views
Any view