F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

120
Field Descri
p
tion
Select Ports Total number of Selected ports.
Unselect Ports Total number of Unselected ports.
Share Type Load-sharing type.
display link-aggregation verbose
Use display link-aggregation verbose to display detailed information about the aggregation groups
corresponding to the aggregate interfaces.
Syntax
display link-aggregation verbose [ { bridge-aggregation | route-aggregation } [ interface-number ] ] [ |
{ begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
bridge-aggregation: Displays detailed information about the Layer 2 aggregation groups corresponding
to Layer 2 aggregate interfaces.
route-aggregation: Displays detailed information about the Layer 3 aggregation groups corresponding
to Layer 3 aggregate interfaces.
interface-number: Specifies an existing aggregate interface number. The value range for this argument is
1 to 1024.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
To display the information about a specific Layer 2 or Layer 3 aggregation group, use the display
link-aggregation verbose bridge-aggregation interface-number or display link-aggregation verbose
route-aggregation interface-number command.
To display the information about all Layer 2 or Layer 3 aggregation groups, use the display
link-aggregation verbose bridge-aggregation or display link-aggregation verbose route-aggregation
command.
To display the information about all aggregation groups, use the display link-aggregation verbose
command.
The bridge-aggregation or route-aggregation keyword is available only when you create Layer 2 or
Layer 3 aggregate interfaces on the device.