F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

122
Table 30 Command output
Field Descri
p
tion
Loadsharing Type
Load sharing type:
• Shar—Load sharing.
• NonS—Non-load sharing.
Port Status Port state: Selected or Unselected.
Flags
LACP state flags:
• A—LACP is enabled.
• B—LACP short timeout.
• C—The sending system detects that the link is aggregatable.
• D—The sending system detects that the link is synchronized.
• E—The sending system detects that the incoming frames are collected.
• F—The sending system detects that the outgoing frames are distributed.
• G—The sending system receives frames in default state.
• H—The sending system receives frames in expired state.
Aggregation Interface Name of the aggregate interface.
Aggregation Mode
Mode of the aggregation group:
• Static for static aggregation.
• Dynamic for dynamic aggregation.
System ID
Local system ID, comprising the system LACP priority and the system MAC
address.
Local Information about the local end.
Port Port type and number.
Status Port state: Selected or Unselected.
Priority Port aggregation priority.
Oper-Key Operational key.
Flag LACP protocol state flag.
Remote Information about the remote end.
Actor Local port type and number.
Partner Remote port index.
enable snmp trap updown
Use enable snmp trap updown to enable linkUp/linkDown trap generation for the aggregate interface.
Use undo enable snmp trap updown to disable linkUp/linkDown trap generation for the aggregate
interface.
Syntax
enable snmp trap updown
undo enable snmp trap updown
Default
LinkUp/linkDown trap generation is enabled for an aggregate interface.