F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

128
Usage guidelines
When the number of ports eligible for becoming Selected ports exceeds the maximum number of
Selected ports allowed in an aggregation group, changing the aggregation priority of a port may affect
the aggregation state of the ports in the aggregation group.
Examples
# Set the aggregation priority of port GigabitEthernet 0/1 to 64.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] link-aggregation port-priority 64
link-aggregation selected-port maximum
Use link-aggregation selected-port maximum to configure the maximum number of Selected ports
allowed in the aggregation group.
Use undo link-aggregation selected-port maximum to restore the default setting.
Syntax
link-aggregation selected-port maximum number
undo link-aggregation selected-port maximum
Default
The maximum number of Selected ports allowed in an aggregation group depends on the hardware
capabilities of the member ports.
Views
Layer 2 aggregate interface view, Layer 3 aggregate interface view
Default command level
2: System level
Parameters
number: Specifies the maximum number of Selected ports allowed in an aggregation group.
The following matrix shows the link-aggregation selected-port maximum command firewalls and UTM
devices compatibility and the value range for the number argument on different firewalls and UTM
devices:
Hardware Command com
p
atibilit
y
Value ran
g
e
F1000-A-EI/F1000-S-EI Yes 1 to 4
F1000-E No N/A
F5000 Yes 1 to 8
Firewall module No N/A
U200-A Yes 1 to 4
U200-S No N/A