F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

131
Syntax
port link-aggregation group number
undo port link-aggregation group
Views
Ethernet interface view
Default command level
2: System level
Parameters
number: Specifies the number of the aggregate interface corresponding to an aggregation group. The
value range for this argument is 1 to 1024.
Usage guidelines
A Layer 2 Ethernet interface can be assigned to a Layer 2 aggregation group only, and a Layer 3
Ethernet interface can be assigned to a Layer 3 aggregation group only.
An Ethernet interface can belong to only one aggregation group.
Examples
# Assign Layer 2 interface GigabitEthernet 0/1 to Layer 2 aggregation group 1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] port link-aggregation group 1
# Assign Layer 3 interface GigabitEthernet 0/2 to Layer 3 aggregation group 2.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/2
[Sysname-GigabitEthernet0/2] port link-aggregation group 2
reset counters interface
Use reset counters interface to clear the statistics of the specified aggregate interface or interfaces.
Syntax
reset counters interface [ { bridge-aggregation | route-aggregation } [ interface-number ] ]
Views
User view
Default command level
2: System level
Parameters
bridge-aggregation: Clears statistics for Layer 2 aggregate interfaces.
route-aggregation: Clears statistics for Layer 3 aggregate interfaces.
interface-number: Specifies an aggregate interface number. The range for this argument is 1 to 1024.
Usage guidelines
Before collecting statistics for a Layer 2 aggregate interface within a specific period, clear the existing
statistics of the interface.