F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

132
• If no keyword or argument is specified, the command clears the statistics of all interfaces in the
system.
• If only the bridge-aggregation or route-aggregation keyword is specified, the command clears the
statistics of all Layer 2 or Layer 3 aggregate interfaces.
• If the bridge-aggregation interface-number or route-aggregation interface-number option is
specified, the command clears the statistics of the specified Layer 2 or Layer 3 aggregate interface.
• The bridge-aggregation or route-aggregation keyword becomes available only after you create
Layer 2 or Layer 3 aggregate interfaces on the device.
Examples
# Clear the statistics of Layer 2 aggregate interface Bridge-Aggregation 1.
<Sysname> reset counters interface bridge-aggregation 1
reset lacp statistics
Use reset lacp statistics to clear the LACP statistics on the specified member ports or all member ports, if
no member ports are specified.
Syntax
reset lacp statistics [ interface interface-list ]
Views
User view
Default command level
1: Monitor level
Parameters
interface-list: Specifies a list of link aggregation member ports, in the format interface-type
interface-number1 [ to interface-type interface-number2 ], where interface-type interface-number
specifies an interface by its type and number.
Examples
# Clear the LACP statistics on all link aggregation member ports.
<Sysname> reset lacp statistics
Related commands
display link-aggregation member-port
shutdown
Use shutdown to shut down the aggregate interface or subinterface.
Use undo shutdown to bring up the aggregate interface or subinterface.
Syntax
shutdown
undo shutdown
Default
Aggregate interfaces and subinterfaces are up.