F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

135
Field Descri
p
tion
OutFlow(Octets) Sum of the octets sent on the active interface during the last interval.
BandWidth(b/s) Bandwidth of the active interface.
UsedBandWidth(b/s)
Actual bandwidth for the active interface participating in load balancing
during the last interval.
display standby state
Use display standby state to display the state information of the active and standby interfaces.
Syntax
display standby state [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, which is a case-sensitive string of 1 to 256 characters.
Examples
# Display the state information of the active and standby interfaces.
<Sysname> display standby state
Interface Interfacestate Standbystate Standbyflag Pri Loadstate
GigabitEthernet0/1 UP MUP MUD TO-HYPNOTIZE
GigabitEthernet0/2 STANDBY STANDBY BU 30
GigabitEthernet0/3 STANDBY STANDBY BU 20
Backup-flag meaning:
M---MAIN B---BACKUP V---MOVED U---USED
D---LOAD P---PULLED
The following tables describe the meanings of each state.
Table 32 States of active and standby interfaces
State Active interface Standb
y
interface
UP The physical link is functioning properly for data transmission.
DOWN
The physical link is not available for data transmission, for example, because no cable
connection is present.