F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

147
Examples
# Configure the minimum interval for transmitting BFD control packets on GigabitEthernet 1/1 as 500
milliseconds.
<Sysname> system-view
[Sysname] interface GigabitEthernet 1/1
[Sysname-GigabitEthernet1/1] bfd min-transmit-interval 500
bfd multi-hop destination-port
Use bfd multi-hop destination-port to configure the destination port number for multi-hop BFD control
packets as 3784 or 4784.
Use undo bfd multi-hop destination-port to restore the default.
Syntax
bfd multi-hop destination-port port-number
undo bfd multi-hop destination-port
Default
The destination port number for multi-hop BFD control packets is 4784.
Views
System view
Default command level
2: System level
Parameters
port-number: Destination port number of multi-hop BFD control packets, 3784 or 4784.
Examples
# Configure the destination port number for multi-hop BFD control packets as 3784.
<Sysname> system-view
[Sysname] bfd multi-hop destination-port 3784
bfd session init-mode
Use bfd session init-mode to configure the mode for establishing a BFD session.
Use undo bfd session init-mode to restore the default.
Syntax
bfd session init-mode { active | passive }
undo bfd session init-mode
Default
BFD uses the active mode.
Views
System view