F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

18
Field Descri
p
tion
Config Pri
Configured priority of the router, or in other words, the priority value specified
by using the vrrp ipv6 vrid priority command.
Running Pri
Current priority of the router. With VRRP tracking configured, when the state of
the monitored interface or track entry changes, the priority of the router
changes.
Preempt Mode
Preemptive mode:
• Yes—The router in the VRRP group operates in preemptive mode.
• No—The router in the VRRP group operates in non-preemptive mode.
Delay Time Preemption delay, in seconds.
Become Master
Time to wait before the router becomes the master. The unit is milliseconds.
Only routers in backup mode have such information.
Auth Type
Authentication type:
• None—No authentication.
• Simple—Simple authentication.
Key Authentication key.
Virtual IP Virtual IPv6 addresses of the VRRP group.
Virtual MAC
Virtual MAC address that corresponds to the virtual IPv6 address of the VRRP
group. It is displayed only when the router is in the state of master.
Master IP
Primary IP address of the interface where the router in the state of master
resides.
VRRP Track Information
Information of the tracked interface or track entry. It is displayed only when the
vrrp ipv6 vrid track or vrrp ipv6 vrid track interface command is executed.
Track Interface
Interface to be tracked. It is displayed only when the vrrp ipv6 vrid track
interface command is executed.
Track Object
Track entry to be tracked. It is displayed only when the vrrp ipv6 vrid track
command is executed.
State
State of the tracked interface or track entry.
State of a tracked interface:
• Up.
• Down.
• Removed.
State of a track entry:
• Invalid.
• Negative.
• Positive.
• Not existing.
Pri Reduced
Priority value that is reduced when the monitored interface is down or
removed, or when the status of the monitored track entry turns to negative. It is
displayed only when the vrrp ipv6 vrid track interface or vrrp ipv6 vrid track
command is executed.
Switchover
Switchover mode. If the status of the monitored track entry turns to negative,
the backup immediately switches to the master.