F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

30
[Sysname] dhbk configuration-backup master synchronization
dhbk enable
Use dhbk enable to enable stateful failover in a specified mode.
Use undo dhbk enable to restore the default.
Syntax
dhbk enable backup-type { dissymmetric-path | symmetric-path }
undo dhbk enable
Default
Stateful failover is disabled.
Views
System view
Default command level
2: System level
Parameters
dissymmetric-path: Enables asymmetric-path mode stateful failover.
symmetric-path: Enables symmetric-path mode stateful failover.
Examples
# Enable symmetric-path mode stateful failover.
<Sysname> system-view
[Sysname] dhbk enable backup-type symmetric-path
dhbk ignore-version-check
Use dhbk ignore-version-check to disable checking version consistency between the two stateful failover
devices.
Use undo dhbk ignore-version-check to enable version consistency check.
Syntax
dhbk ignore-version-check
undo dhbk ignore-version-check
Default
Version consistency check is enabled.
Views
System view
Default command level
2: System level
Usage guidelines
Execute the command on both stateful failover devices.