F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Command Reference-6PW100

51
Interface Information:
Interface Name Interface Status
GigabitEthernet0/1 Up
GigabitEthernet0/2 Up
# Display brief information about all collaboration groups.
<Sysname> display link-group brief
Group Number Group Status
1 Up
2 Up
Table 16 Command output
Field Descri
p
tion
Group Number Collaboration group number.
Group Status
Collaboration group state:
• Initial—The collaboration group has no interface.
• Up—All interfaces in the collaboration group are up.
• Down—At least one interface in the collaboration group is down, and other
interfaces are in linkgroup-down state.
• Ambiguous—The collaboration group state is unclear and is determined after ten
seconds.
Interface Name Name of interface belonging to this collaboration group.
Interface Status
Interface state:
• Up—The physical state of the interface is up.
• Down—The physical state of an interface is down.
• Linkgroup-down—The interface is shut down by the collaboration group and cannot
exchange packets with its peer.
link-group
Use link-group to add an interface to a collaboration group.
Use undo link-group to remove an interface from a collaboration group.
Syntax
link-group link-group-number
undo link-group link-group-number
Default
An interface does not belong to any collaboration group.
Views
Interface view
Default command level
2: System level