F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

100
Figure 51 Collaboration
The following describes how a static route destined for 192.168.0.88 is monitored through collaboration:
1. NQA monitors the reachability to 192.168.0.88.
2. When 192.168.0.88 becomes unreachable, NQA notifies the track module of the change.
3. The track module notifies the static routing module of the state change.
4. The static routing module sets the static route as invalid according to a predefined action.
For more information about collaboration, see High Availability Configuration Guide.
139BThreshold monitoring
Threshold monitoring enables the NQA client to display results or send trap messages to the network
management station (NMS) when the performance metrics that an NQA operation gathers violate the
specified thresholds.
531HTable 7 describes the relationships between performance metrics and NQA operation types.
Table 7 Performance metrics and NQA operation types
Performance metric NQA o
p
eration t
yp
es that can
g
ather the metric
Probe duration All NQA operation types excluding UDP jitter and voice
Number of probe failures All NQA operation types excluding UDP jitter and voice
Round-trip time UDP jitter and voice
Number of discarded packets UDP jitter and voice
One-way jitter (source-to-destination and
destination-to-source)
UDP jitter and voice
One-way latency (source-to-destination and
destination-to-source)
UDP jitter and voice
Calculated Planning Impairment Factor (ICPIF)
(see "
532H
Configuring a voice operation")
Voice
Mean Opinion Scores (MOS) (see
"
533H
Configuring a voice operation")
Voice