F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

101
43B
NQA configuration task list
Complete the following task to configure the NQA server:
Task Remarks
534H
Configuring the NQA server
Required for NQA operations types of TCP, UDP echo, UDP
jitter, and voice.
Complete these tasks to configure the NQA client:
Task Remarks
535H
Enabling the NQA client Required.
536H
Configuring an ICMP echo operation
Required.
Use at least one approach.
537H
Configuring a DHCP operation
538H
Configuring a DNS operation
539H
Configuring an FTP operation
540H
Configuring an HTTP operation
541H
Configuring a UDP jitter operation
542H
Configuring an SNMP operation
543H
Configuring a TCP operation
544H
Configuring a UDP echo operation
545H
Configuring a voice operation
546H
Configuring a DLSw operation
547H
Configuring optional parameters for an NQA operation Optional.
548H
Configuring the collaboration function Optional.
549H
Configuring threshold monitoring Optional.
550H
Configuring the NQA statistics function Optional.
551H
Configuring NQA history records saving function Optional.
552H
Scheduling an NQA operation Required.
44B
Configuring the NQA server
To perform TCP, UDP echo, UDP jitter, and voice operations, you must enable the NQA server on the
destination device. The NQA server listens and responds to requests on the specified IP addresses and
ports.
You can configure multiple TCP (or UDP) listening services on an NQA server, each of which corresponds
to a specific destination IP address and port number. The destination IP address and port number must
be the same as those configured on the NQA client and must be different from those of an existing
listening service.