F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

149
349BNetwork requirements
As shown in 578HFigure 69, aggregate the ports on Device A and Device B to form a static link aggregation
group, enhancing link reliability.
Figure 69 Network diagram
350BConfiguration procedure
1. Create static link aggregation group 1 on Device A:
a. Select Network > Link Aggregation from the navigation tree.
b. Click Create to enter the page as shown in 579HFigure 70.
c. Set the link aggregation interface ID to 1. Select GigabitEthernet 0/1, GigabitEthernet 0/2,
and GigabitEthernet 0/3 on the chassis front panel.
d. Click Apply.