F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

150
Figure 70 Creating static link aggregation group 1
2. Create static link aggregation group 1 on Device B.
The configuration procedure is similar to that for Device A. (Details not shown.)
351BVerifying the configuration
To view information about Layer 2 static aggregate interface 1 on Device A:
1. Select Network > Link Aggregation from the navigation tree.
The Summary tab appears.
2. Select aggregate interface Bridge-Aggregation1 from the list on the upper part, as shown in 580HFigure
71.
This aggregate interface comprises three Selected ports: GigabitEthernet 0/1, GigabitEthernet
0/2, and GigabitEthernet 0/3.