F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

179

# Configure the enable-threshold of load balancing to 80 and the disable-threshold to 20.

[FirewallA-GigabitEthernet0/1] standby threshold 80 20

4. Verify the configuration on Firewall A:

# Display the traffic statistics for the active interface taking part in load balancing.

[FirewallA-GigabitEthernet0/1] display standby flow

Interfacename : GigabitEthernet0/1

Flow-interval(s) : 30

LastInOctets : 139

LastOutOctets : 22033

InFlow(Octets) : 0

OutFlow(Octets) : 0

BandWidth(b/s) : 10000

UsedBandWidth(b/s) : 0

# Display the state of the active and standby interfaces.

[FirewallA-GigabitEthernet0/1] display standby state

Interface Interfacestate Standbystate Standbyflag Pri Loadstate

GigabitEthernet0/1 UP MUP MUD TO-HYPNOTIZE

GigabitEthernet0/2 STANDBY STANDBY BU 30

GigabitEthernet0/3 STANDBY STANDBY BU 20

Backup-flag meaning:

M---MAIN B---BACKUP V---MOVED U---USED

D---LOAD P---PULLED

# When the data traffic on the active interface GigabitEthernet 0/1 exceeds 8000 kbps (that is,

10000 kbps × 80%), standby interface GigabitEthernet 0/2 with a higher priority is enabled first.

Then you can view the state of the active and standby interfaces.