F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

207
Table 18 Configuration items
Item Descri
p
tion
Health Monitoring Health monitoring type.
Check Interval Interval at which health monitoring is performed.
Timeout Timeout for a health monitoring operation.
Retry Times
When the number of retry times is n, if health monitoring is performed for n times and
the corresponding server or port is unavailable, the health monitoring is considered
failed.
Destination IP
Destination IP address for health monitoring.
If this parameter is not specified, the next hop IP address of the physical link is adopted.
Destination Port
Destination port number for health monitoring.
This parameter is not supported by ICMP health monitoring.
378BConfiguring the health monitoring method for the best performing link function
1. Select High Reliability > Load Balance > Health Monitor from the navigation tree.
The heath monitoring page appears.
2. Click the icon corresponding to the proxim_dns, proxim_icmp, or proxim_tcp_half_open
health monitoring method.
The page for modifying health monitoring parameters appears.
Figure 108 Modifying health monitoring parameters
3. Configure the parameters (proxim_dns) as described in 648HTable 19.
Configure the parameters for the proxim_icmp and proxim_tcp_half_open in the same way you
configure the ICMP and TCP half open health monitoring methods.
4. Click Apply.