F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

212
Item Descri
p
tion
Outbound Method
Specify a health monitoring method (proxim_icmp or proxim_tcp_half_open) for
outbound link load balancing to obtain the best performing link parameters (network
delay and router hops).
380BConfiguring a static best performing link entry
1. Select High Reliability > Load Balance > Link Load Balance > Best-Performing Link from the
navigation tree.
2. Click the Best Performing Link Table tab.
The best performing link table displays all the dynamic and static best performing link entries.
Figure 112 Best performing link table
3. Click Add.
The page for creating a static best performing link entry appears.
Figure 113 Creating a static best performing link entry
4. Configure the parameters as described in 651HTable 22.
5. Click Apply.
Table 22 Configuration items
Item Remarks
IP Address
IP address of the static best performing link entry
It is the destination IP address of packets for outbound link load balancing.
Mask Mask length of the static best performing link entry
Physical Link Name of the physical link corresponding to the static best performing link entry
206BCreating a logical link group
1. Select High Reliability > Load Balance > Link Load Balance > Outbound from the navigation tree.