F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

236
c. Enter the logical link name LogicalLink1, select the logical link group LogicalLinkGrp and
physical link ISP1, and enter the ACL number 3000.
d. Click Apply.
Figure 140 Creating logical link LogicalLink1 corresponding to ISP1
6. Create logical link LogicalLink2 corresponding to ISP2:
a. Click Add on the Logical Link tab.
b. Enter the logical link name LogicalLink2, and select the logical link group LogicalLinkGrp and
physical link ISP2.
c. Click Apply.
7. Configure virtual service vs:
a. Click the Virtual Service tab
b. Select Match IP, and then click Add.
c. Enter the virtual service vs and virtual service address 0.0.0.0.
d. Select the mask 0 (0.0.0.0) and protocol type Any, and enter the port number 0.
e. Select the logical link group LogicalLinkGrp.
f. Select the Enable Policy and Enable Best-Performing Link options.
g. Click Apply.