F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

36
c. Click Apply.
Figure 21 Creating VRRP group 2
4. Set the priority of Firewall A in VRRP group 1 to 110:
a. On the VRRP group page of GigabitEthernet 0/1, click the icon corresponding to VRRP
group 1.
b. Enter 110 in the Priority field.
c. Click Apply.
Figure 22 Setting the priority of Firewall A in VRRP group 1
260B Configuring Firewall B
The Web interfaces for configuring Firewall B are similar to those when you configure Firewall A. The
figures are omitted.
1. Configure the IP address of each interface and the zones. (Details not shown.)
2. Create VRRP group 1 on GigabitEthernet 0/1 and configure the virtual IP address as
202.38.160.111:
a. Select High Availability > VRRP from the navigation tree.
b. Click the icon corresponding to GigabitEthernet 0/1.
The VRRP group page appears.
c. Click Add.