F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices High Availability Configuration Guide-6PW100

[FirewallA] interface gigabitethernet 1/2

[FirewallA-gigabitethernet 1/2] vrrp vrid 1 virtual-ip 192.168.0.10

[FirewallA-gigabitethernet 1/2] vrrp vrid 1 priority 110

[FirewallA-gigabitethernet 1/2] vrrp vrid 1 track 1 reduced 20

[FirewallA-gigabitethernet 1/2] return

4. Configure VRRP on Firewall B:

# Create VRRP group 1, and configure the virtual IP address of the group as 192.168.0.10.

<FirewallB> system-view

[FirewallB] interface gigabitethernet 1/2

[FirewallB-gigabitethernet 1/2] vrrp vrid 1 virtual-ip 192.168.0.10

[FirewallB-gigabitethernet 1/2] return

297BVerifying the configuration

# Display the detailed information of the VRRP group on Firewall A.

<FirewallA> display vrrp verbose

IPv4 Standby Information:

Run Mode : Standard

Run Method : Virtual MAC

Total number of virtual routers : 1

Interface gigabitethernet 1/2

VRID : 1 Adver Timer : 1

Admin Status : Up State : Master

Config Pri : 110 Running Pri : 110

Preempt Mode : Yes Delay Time : 0

Auth Type : None

Virtual IP : 192.168.0.10

Virtual MAC : 0000-5e00-0101

Master IP : 192.168.0.101

VRRP Track Information:

Track Object : 1 State : Positive Pri Reduced : 20

# Display the information of track entry 1 on Firewall A.

<FirewallA> display track 1

Track ID: 1

Status: Positive

Duration: 0 days 0 hours 0 minutes 32 seconds

Notification delay: Positive 0, Negative 0 (in seconds)

Reference object:

BFD session:

Packet type: Echo

Interface : gigabitethernet 1/1

Remote IP : 1.1.1.2

Local IP : 1.1.1.1

# Display the detailed information of the VRRP group on Firewall B.

<FirewallB> display vrrp verbose

IPv4 Standby Information:

Run Mode : Standard

Run Method : Virtual MAC

Total number of virtual routers : 1