F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices NAT and ALG Command Reference-6PW100

23
NAT-PT configuration commands
NOTE:
NAT-PT is not supported on VLAN interfaces and does not support VPN instances, IPv4 fragments, or
ICMPv6 fragments.
The following matrix shows the feature and hardware compatibility:
Hardware NAT-PT com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
display natpt address-group
Use display natpt address-group to display NAT-PT address pool configuration information.
Syntax
display natpt address-group [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default Level
1: Monitor level
Parameters
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays the lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Examples
# Display the NAT-PT address pool configuration information.
<Sysname> display natpt address-group
NATPT IPv4 Address Pool Information:
1 : from 1.1.1.1 to 1.1.1.4