F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices NAT and ALG Command Reference-6PW100

27
Usage guidelines
The statistics does not include information about port translation through the NAPT-PT mechanism.
Examples
# Display NAT-PT statistics.
<Sysname> display natpt statistics
Statistics:
Total Sessions: 0
Expired Sessions: 0
Hits: 0
Misses: 0
Total Address Mapping: 0 (static: 0 dynamic: 0 )
Total V6Server Mappings: 0
Enabled Interfaces:
GigabitEthernet0/1
Table 10 Command output
Field Descri
p
tion
Total Sessions Total number of sessions.
Expired Sessions Number of expired sessions.
Hits Number of times that a packet matches a NAT-PT session.
Misses Number of times that a packet matches no NAT-PT sessions.
Total Address Mapping Number of static and dynamic mappings.
Total V6Server Mappings Number of V6Server mappings (address/port mappings).
Enabled Interfaces NAT-PT enabled interfaces.
Related commands
reset natpt statistics
natpt address-group
Use natpt address-group to configure a NAT-PT address pool.
Use undo natpt address-group to remove the specified NAT-PT address pool.
Syntax
natpt address-group group-number start-ipv4-address end-ipv4-address
undo natpt address-group group-number
Views
System view
Default Level
2: System level