Manualshelf

F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices NAT and ALG Command Reference-6PW100

ManualsBrandsHP ManualsComputer AccessoriesHP 7100/7200 IPsec dl Module
31323334353637383940
34
Syntax
natpt v6bound static ipv6-address ipv4-address
undo natpt v6bound static ipv6-address ipv4-address
Views
System view
Default Level
2: System level
Parameters
ipv6-address: IPv6 address to be mapped.
ipv4-address: IPv4 address to which an IPv6 address is mapped.
Examples
# Configure the static mapping between the IPv6 address 2001::1 and the IPv4 address 2.3.4.5 on the
IPv6 side.
<Sysname> system-view
[Sysname] natpt v6bound static 2001::1 2.3.4.5
Related commands
display natpt address-mapping
reset natpt statistics
Use reset natpt statistics to clear all NAT-PT statistics.
Syntax
reset natpt statistics
Views
User view
Default Level
1: Monitor level
Parameters
None
Examples
# Clear all NAT-PT statistics.
<Sysname> reset natpt statistics
Related commands
display natpt statistics