F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices NAT and ALG Command Reference-6PW100

38
It is users, not conflict detection, that make sure there is no conflict between configurations in interface
view and system view, and configurations in different interface views. Conflict detection is performed on
configurations for an interface by using the same algorithm as the one used for configurations in system
view.
Examples
# Configure a static IP port block for users from 192.168.1.1 to 192.168.1.10.
<Sysname> system-view
[Sysname] nat444 static local 192.168.1.1 192.168.1.10 global 202.1.1.1 202.1.1.2
port-range 10001 20000 block-size 2000
Related commands
nat444 outbound static
nat444 log session-end
Use nat444 log session-end to enable NAT444 session removal logging.
Use undo nat444 log session-end to restore the default.
Syntax
nat444 log session-end
undo nat444 log session-end
Default
NAT444 session removal logging is disabled.
Views
System view
Parameter
None
Examples
# Enable NAT444 session removal logging.
<Sysname> system-view
[Sysname] nat444 log session-end
nat444 log session-start
Use nat444 log session-start to enable NAT444 session establishement logging.
Use undo nat444 log session-start to restore the default.
Syntax
nat444 log session-start
undo Nat444 log session-start
Default
NAT444 session establishment logging is disabled.
Views
System view