F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices NAT and ALG Configuration Guide-6PW100

61
i. Select Source IP Address, enter 192.168.1.0 as the source IP address, and enter 0.0.0.255 as
the source wildcard.
j. Click Apply.
Figure 47 Configuring an ACL rule to permit packets sourced from 192.168.1.0/24
k. Click Add.
l. Select Deny as the operation.
m. Click Apply.
Figure 48 Configuring an ACL rule to deny packets
3. Configure the NAT address pool:
a. Select Firewall > NAT Policy > Dynamic NAT from the navigation tree.
b. In the Address Pool area, click Add.
c. Enter 1 in the Index field.
d. Enter 5.5.5.9 as the start IP address.
e. Enter 5.5.5.11 as the end IP address.
f. Click Apply.