F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

988
Field Descri
p
tion
Downstream interface(s) information
Information of the downstream interfaces, including:
• Number of downstream interfaces.
• Downstream interface name.
• Protocol type configured on the downstream interface.
• Uptime of the downstream interfaces.
• Expiry time of the downstream interfaces.
Related commands
display ipv6 multicast routing-table
display pim ipv6 rp-info
Use display pim ipv6 rp-info to display RP information.
Syntax
display pim ipv6 rp-info [ ipv6-group-address ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-address: Specifies an IPv6 multicast group by its address, in the range of FFxy::/16
(excluding FFx0::/16, FFx1::/16, FFx2::/16 and FF0y::), where x and y represent any hexadecimal
number between 0 and F, inclusive. If you do not provide a group address, this command displays the RP
that corresponds to all IPv6 multicast groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
The RP information includes the information of RPs dynamically found by the BSR mechanism and static
RPs.
Examples
# Display information about the RP that corresponds to IPv6 multicast group FF0E::101.
<Sysname> display pim ipv6 rp-info ff0e::101
PIM-SM BSR RP information:
prefix/prefix length: FF0E::101/64 [B]
RP: 2004::2
Priority: 192
HoldTime: 130