F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

992
hello-option neighbor-tracking (IPv6 PIM view)
Use hello-option neighbor-tracking to globally disable join suppression (namely, enable neighbor
tracking).
Use undo hello-option neighbor-tracking to enable join suppression.
Syntax
hello-option neighbor-tracking
undo hello-option neighbor-tracking
Default
Join suppression is enabled, and neighbor tracking is disabled.
Views
IPv6 PIM view
Default command level
2: System level
Examples
# Disable join suppression globally.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option neighbor-tracking
Related commands
pim ipv6 hello-option neighbor-tracking
hello-option override-interval (IPv6 PIM view)
Use hello-option override-interval to configure the global value of the prune override interval.
Use undo hello-option override-interval to restore the default.
Syntax
hello-option override-interval interval
undo hello-option override-interval
Default
The prune override interval is 2500 milliseconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies a prune override interval in milliseconds. The value ranges from 1 to 65535.
Examples
# Set the prune override interval to 2000 milliseconds globally.