F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

993
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] hello-option override-interval 2000
Related commands
• hello-option lan-delay
• pim ipv6 hello-option lan-delay
• pim ipv6 hello-option override-interval
holdtime assert (IPv6 PIM view)
Use holdtime assert to configure the global value of the assert timeout timer.
Use undo holdtime assert to restore the default.
Syntax
holdtime assert interval
undo holdtime assert
Default
The assert timeout timer is 180 seconds.
Views
IPv6 PIM view
Default command level
2: System level
Parameters
interval: Specifies an assert timeout timer in seconds. The value ranges from 7 to 2147483647.
Examples
# Set the global value of the assert timeout timer to 100 seconds.
<Sysname> system-view
[Sysname] pim ipv6
[Sysname-pim6] holdtime assert 100
Related commands
• holdtime join-prune
• pim ipv6 holdtime assert
• pim ipv6 holdtime join-prune
holdtime join-prune (IPv6 PIM view)
Use holdtime join-prune to configure the global value of the join/prune timeout timer.
Use undo holdtime join-prune to restore the default.
Syntax
holdtime join-prune interval
undo holdtime join-prune