F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1005
Examples
# Set the graft retry period to 80 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 timer graft-retry 80
pim ipv6 timer hello
Use pim ipv6 timer hello to configure the interval at which hello messages are sent on the current
interface.
Use undo pim ipv6 timer hello to restore the default.
Syntax
pim ipv6 timer hello interval
undo pim ipv6 timer hello
Default
Hello messages are sent at the interval of 30 seconds.
Views
Interface view
Default command level
2: System level
Parameters
interval: Specifies a hello interval in seconds. The value ranges from 1 to 2147483647.
Examples
# Set the hello interval to 40 seconds on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] pim ipv6 timer hello 40
Related commands
timer hello
pim ipv6 timer join-prune
Use pim ipv6 timer join-prune to configure the interval at which join/prune messages are sent on the
current interface.
Use undo pim ipv6 timer join-prune to restore the default.
Syntax
pim ipv6 timer join-prune interval
undo pim ipv6 timer join-prune
Default
The join/prune interval is 60 seconds.