F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1018
MLD configuration commands
The term "router" in this document refers to both routers and routing-capable firewalls and UTM devices.
The following matrix shows the feature and hardware compatibility:
Hardware MLD com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No
display mld group
Use display mld group to display MLD group information.
Syntax
display mld group [ ipv6-group-address | interface interface-type interface-number ] [ static | verbose ]
[ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
ipv6-group-address: Specifies an MLD group address, in the range of FFxy::/16 (excluding FFx0::/16,
FFx1::/16, FFx2::/16, and FF0y::), where x and y represent any hexadecimal number in the range of 0
to F. If you do not specify any IPv6 multicast group address, this command displays information about all
MLD groups.
interface interface-type interface-number: Specifies an interface by its type and number. If you do not
specify interface-type interface-number, the command displays information about the MLD groups that
all interfaces joined.
static: Specifies MLD groups that the interfaces statically joined. If you do not specify this keyword, the
command displays the MLD groups that the interfaces dynamically joined.
verbose: Displays detailed information of MLD groups.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.