F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1045
Default
The MLD version is MLDv1.
Views
Interface view
Default command level
2: System level
Parameters
version-number: Specifies an MLD version, 1 or 2.
Examples
# Set the MLD version to MLDv2 on GigabitEthernet 0/1.
<Sysname> system-view
[Sysname] interface gigabitethernet 0/1
[Sysname-GigabitEthernet0/1] mld version 2
Related commands
version
require-router-alert (MLD view)
Use require-router-alert to globally configure the device to discard MLD messages without the
Router-Alert option.
Use undo require-router-alert to restore the default.
Syntax
require-router-alert
undo require-router-alert
Default
The device does not check the Router-Alert option. That is, it forwards all received MLD messages to the
upper layer protocol for processing.
Views
MLD view
Default command level
2: System level
Examples
# Configure the device to discard MLD messages without the Router-Alert option.
<Sysname> system-view
[Sysname] mld
[Sysname-mld] require-router-alert
Related commands
• mld require-router-alert
• send-router-alert