F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1055
Hardware Command com
p
atible
U200-S No
Examples
# Configure node 10 in permit mode of routing policy policy1. Add AS number 200 before the original
AS_PATH attribute of BGP routing information matching AS path list 1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match as-path 1
[Sysname-route-policy] apply as-path 200
apply comm-list delete
Use apply comm-list delete to delete the COMMUNITY attributes specified by a community list from BGP
routes.
Use undo apply comm-list to remove the clause configuration.
Syntax
apply comm-list { comm-list-number | comm-list-name } delete
undo apply comm-list
Default
No COMMUNITY attributes are removed from BGP routes.
Views
Routing policy view
Default command level
2: System level
Parameters
comm-list-number: Specifies a basic community list by its number in the range of 1 to 99 or an advanced
community list by its number in the range of 100 to 199.
comm-list-name: Specifies a community list by its name, a string of 1 to 31 characters, which can contain
letters, numbers, and signs.
Usage guidelines
The following matrix shows the apply comm-list delete command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes