F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1066
Views
Routing policy view
Default command level
2: System level
Parameters
node-number: Routing policy node number, in the range of 0 to 65535.
Usage guidelines
The specified next node must have a larger number than the current node number.
Example
# Specify the next node 20 for node 10 of routing policy policy1.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] continue 20
display ip as-path
Use display ip as-path to display BGP AS path list information.
Syntax
display ip as-path [ as-path-number ] [ | { begin | exclude | include } regular-expression ]
Views
Any view
Default command level
1: Monitor level
Parameters
as-path-number: Specifies an AS path list by its number, in the range of 1 to 256.
|: Filters command output by specifying a regular expression. For more information about regular
expressions, see Getting Started Guide.
begin: Displays the first line that matches the specified regular expression and all lines that follow.
exclude: Displays all lines that do not match the specified regular expression.
include: Displays all lines that match the specified regular expression.
regular-expression: Specifies a regular expression, a case-sensitive string of 1 to 256 characters.
Usage guidelines
Information about all BGP AS path lists is displayed if no as-path-number is specified.
The following matrix shows the display ip as-path command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes