F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1073
Views
Routing policy view
Default command level
2: System level
Parameters
value: Specifies a cost in the range of 0 to 4294967295.
Examples
# Configure node 10 in permit mode of routing policy policy1 to permit routing information with a cost
of 8.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match cost 8
if-match extcommunity
Use if-match extcommunity to specify extended community lists for matching against the extended
community attribute of BGP routing information.
Use undo if-match extcommunity to remove the match criterion.
Syntax
if-match extcommunity ext-comm-list-number&<1-16>
undo if-match extcommunity [ ext-comm-list-number&<1-16> ]
Default
The match criterion is not configured.
Views
Routing policy view
Default command level
2: System level
Parameters
ext-comm-list-number: Specifies an extended community list by its number, in the range of 1 to 199.
&<1-16>: Indicates that the argument before it can be entered up to 16 times.
Usage guidelines
The following matrix shows the if-match extcommunity command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes