F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1075
Syntax
if-match route-type { external-type1 | external-type1or2 | external-type2 | internal | is-is-level-1 |
is-is-level-2 | nssa-external-type1 | nssa-external-type1or2 | nssa-external-type2 } *
undo if-match route-type [ external-type1 | external-type1or2 | external-type2 | internal | is-is-level-1
| is-is-level-2 | nssa-external-type1 | nssa-external-type1or2 | nssa-external-type2 ] *
Default
The match criterion is not configured.
Views
Routing policy view
Default command level
2: System level
Parameters
external-type1: Matches OSPF Type 1 external routes.
external-type1or2: Matches OSPF Type 1 or 2 external routes.
external-type2: Matches OSPF Type 2 external routes.
internal: Matches internal routes (OSPF intra-area and inter-area routes).
is-is-level-1: Matches IS-IS Level-1 routes.
is-is-level-2: Matches IS-IS Level-2 routes.
The following matrix shows the keywords is-is-level-1, is-is-level-2, and echo-packet and firewalls and
UTM compatibility:
Hardware Ke
y
words com
p
atible
F1000-A-EI/F1000-S-EI No
F1000-E No
F5000 Yes
Firewall module No
U200-A No
U200-S No
nssa-external-type1: Matches OSPF NSSA Type 1 external routes.
nssa-external-type1or2: Matches OSPF NSSA Type 1 or 2 external routes.
nssa-external-type2: Matches OSPF NSSA Type 2 external routes.
Examples
# Configure node 10 in permit mode of routing policy policy1 to match OSPF internal routes.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy] if-match route-type internal