F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1076
if-match tag
Use if-match tag to match routing information having the specified tag.
Use undo if-match tag to remove the match criterion.
Syntax
if-match tag value
undo if-match tag
Default
No tag match criterion is not configured.
Views
Routing policy view
Default command level
2: System level
Parameters
value: Specifies a tag in the range of 0 to 4294967295.
Usage guidelines
Only F5000 firewalls support this command.
Examples
# Configure node 10 in permit mode of routing policy policy1 to match RIP and OSPF routing
information having a tag of 8.
<Sysname> system-view
[Sysname] route-policy policy1 permit node 10
[Sysname-route-policy-policy1-10] if-match tag 8
ip as-path
Use ip as-path to create an AS path list.
Use undo ip as-path to remove an AS path list.
Syntax
ip as-path as-path-number { deny | permit } regular-expression
undo ip as-path as-path-number
Default
No AS path list is created.
Views
System view
Default command level
2: System level
Parameters
as-path-number: Specifies an AS path list by its number, in the range of 1 to 256.