F3726, F3211, F3174, R5135, R3816-HP Firewalls and UTM Devices Network Management Command Reference-6PW100

1079
<Sysname> system-view
[Sysname] ip community-list 100 permit ^10
ip extcommunity-list
Use ip extcommunity-list to define an extended community list entry.
Use undo ip extcommunity-list to remove an extended community list.
Syntax
ip extcommunity-list ext-comm-list-number { deny | permit } { rt route-target | soo site-of-origin }&<1-16>
undo ip extcommunity-list ext-comm-list-number
Default
No extended community list is defined.
Views
System view
Default command level
2: System level
Parameters
ext-comm-list-number: Specifies an extended community list by its number, in the range of 1 to 199.
deny: Specifies the match mode for the extended community list as deny.
permit: Specifies the match mode for the extended community list as permit.
rt route-target: Specifies the RT extended community attribute, a string of 3 to 21 characters.
soo site-of-origin: Sets the SoO extended community attribute, a string of 3 to 21 characters.
A route-target or site-of-origin has the following forms:
• A 16-bit AS number: a 32-bit self-defined number, for example, 101:3;
• A 32-bit IP address: a 16-bit self-defined number, for example, 192.168.122.15:1.
• A 32-bit AS number: 16-bit self-defined number, for example, 70000:3. The AS number must be no
less than 65536.
&<1-16>: Indicates that the argument before it can be entered up to 16 times.
Usage guidelines
The following matrix shows the ip extcommunity-list command and firewalls and UTM devices
compatibility:
Hardware Command com
p
atible
F1000-A-EI/F1000-S-EI Yes
F1000-E Yes
F5000 Yes
Firewall module Yes
U200-A Yes
U200-S No